Sms Messages - Becker Online Pro 7800 Operating Manual

SMS messages

There are two possibilities:
• Enter the number with the multifunction buttons
to . To delete incorrect numbers,
turn the right rotary control
confirm the number entered, briefly press the
right rotary control .
• Turn the right rotary control to the right. The
telephone book is called up. You can select a
number or name from the telephone book as de-
scribed under "Dialling a telephone book entry"
on page 131. Briefly press the right rotary
control to confirm the selected entry.
Note:
If the SMS central network number has not been
entered, you will be prompted to do so now (see
also page 145).
The Text Entry menu is displayed.
You can now enter text. There are two possibilities
to do this:
• Selecting letters or characters with the right ro-
tary control and pressing to confirm. The se-
lected letters are displayed inversely.
• Select characters or letters by pushing the mul-
tifunction button under the desired character re-
peatedly; i.e. to select a C, the multifunction
button under ABC must be pressed 3 times.
144
Other entry or formatting possibilities:
• Upper/Lower-Case Letters
With multifunction button
to the left. To choose between upper and lower case letters.
• Special characters/ Numbers
By pressing multifunction button
choose between entry of special characters and
numbers.
• Return (New Line)
Press and hold multifunction button
get to the next line.
• Moving the cursor
Press multifunction button
press multifunction button
two modes for moving the cursor. Each mode is
indicated by a change in the display above the
multifunction button.
If is displayed above the multifunction but-
ton, the cursor can be moved from line to line by
turning the right rotary control
If is displayed above the multifunction
button, the cursor can be moved left or right in
the current line by turning the right rotary
control .
Then, the right rotary control
repeatedly until the multifunction button is dis-
played as described at the beginning. Text can
then be entered once again.
• Deleting characters
Characters entered individually can be deleted
by briefly pressing multifunction button
, you can
By pressing
button
, you can
By pressing the right rotary control for more than
2 seconds, the written message is confirmed.
, to
By turning the right rotary control
. Repeatedly
tween ,
Yes No
to select one of
active) and press the control to confirm.
Select to send your message.
Yes
indicates that the SMS is being sent. If the SMS
transmission is successful,
Select to return to the previous menu without
No
sending the message.
.
Select Cancel
and the message can be edited further.
must be pressed
.
and holding multifunction
, all generated text will be deleted.
, select be-
and (the inverted entry is
Cancel
Sending SMS
is displayed.
SMS sent
to return to the Text Entry menu