Volume Display (Vol); Hands-Free Microphone Setting; Telephone Receiver Volume Setting; Limiting The Volume Level (Lim) - Becker Online Pro 7800 Operating Manual

User settings

Volume display (Vol)

With this function, the volume display can be
turned on or off.
To set, call up the General Settings menu. Press
multifunction button to call up the 2nd level
of the General Settings menu. Press multifunction
button . With the right rotary control
select either
Volume Indic. On
.
Indic. Off
The setting is stored automatically.
Hands-free microphone setting (Mic)
With this function, the sensitivity of the hands-free
microphone can be set.
To set, call up the User Settings menu. By pressing
multifunction button , call up the 2nd level
of the User Settings menu. Press multifunction
button . With the right rotary control
lect between (low sensitivity) and
-5
sitivity).
The setting is stored automatically.
174

Telephone receiver volume setting

(HsV)
With this function, the volume of the optional tel-
ephone receiver can be set.
To set, call up the General Settings menu. Press
multifunction button
of the General Settings menu. Press multifunction
or
Volume
button . With the right rotary control
lect between 0 (low volume) and
The setting is stored automatically.

Limiting the volume level (Lim)

With this function, the maximum volume of the
audio signal
Overmodulation and distortion are prevented.
To set, call up the General Settings menu. Press
multifunction button
se-
of the General Settings menu. By pressing
(high sen-
5
multifunction button
on or Limiter off
The setting is stored automatically.
to call up the 3rd level
se-
7 (high volume).
is limited via a limiter.
to call up the 3rd level
, select either Limiter
.
Adjusting the volume difference be-
tween digital audio sources (Lvl)
Music CDs are produced with differing volume
levels. This can lead to extreme differences in
volume when switching from radio and e.g. CD
modes.
In order to minimise this effect, you can adjust the
volume difference between the digital audio
sources (CD in built-in drive and MP3) with
respect to the radio source volume (does not apply
to CD changer).
To set, call up the General Settings menu. Press
multifunction button to call up the 3rd level
of the General Settings menu. Press the
multifunction button . Use the right rotary
control to select -10 (source quieter) or
(source louder).
The setting is stored automatically.
+10