Pin Settings - Becker Online Pro 7800 Operating Manual

PIN Settings

In the Telephone Settings menu, select
with the right rotary control
tings
the control to confirm.
Select
or
Set PIN autom.
Change PIN
by turning the right rotary control
firm your selection.
•
Set PIN autom.
The PIN number can be stored; i.e. you will not
have to enter the PIN each time the unit is turned
on.
•
Change PIN
With this selection, the PIN number can be
changed.
Automatically set PIN
Select and confirm
PIN set-
By turning the right rotary control
and press
tween , and
On Off
active) and press the control to confirm.
Selecting saves the entered PIN number.
On
If you select
Off
deleted and the programme will return to the Tele-
phone Settings.
Selecting
Cancel
Settings menu without changing status.
. Press to con-
Note:
If is selected and the SIM card (with another
On
PIN) is changed while the unit is turned off, you
will be requested to enter the new PIN number.
There are only 2 possibilities, however, to enter the
correct PIN number.
Set PIN autom. .
select be-
(the inverted entry is
Cancel
, any stored PIN number will be
will return to the Telephone
Telephone mode
Change PIN
After selecting Change PIN , a request for the cur-
rent PIN number will appear first.
Enter the number.
Then, you will be requested to enter the new PIN
number.
Enter the new number and confirm it by pressing
the right rotary control .
Note:
The PIN number must be a 4 to 8 digit number.
After confirming the new PIN number, you will be
requested to enter the new PIN number once again
for confirmation.
Enter the new number once again and confirm en-
try by pressing the right rotary control .
139