AT&T OneVision DEFINITY G3 Fault Management User Manual page 86

How Fault Manager Displays Faults
NOTE:
These reports show error data that is current at the time you request the
report. Fault Management does not update the data while the report
window remains open. To ensure that the data is up to date, close and then
re-open any open report window.
Error reports display the same information that is displayed when you execute
the DEFINITY G3 command, "display errors," with the following exception:
Exception : The report does not include seconds in the First Occur field,
since that is not normally displayed and requires user specification in the
"display errors" command.
Double click on an icon for more information.
Table 5-3. Types of Error Reports
Screen
Switch
View
Cabinet
View
Circuit
Pack
Information
Port
Information
External
Devices
View
Individual
External
Device
Fault Menu Command
All Errors
Switch Level Errors
All Errors for Cabinet #
Cabinet Level Errors for
Cabinet #
All Errors for Circuit
Pack #
Circuit Pack Level
Errors for Circuit Pack #
All Errors for Port #
All External Device
Errors
Display Errors For
External Device
<name>
Report Description
All errors in the PBX
All errors that are in the PBX but are
not associated with any cabinet
All errors in the cabinet
All active alarms that are in the
cabinet but are not associated with
any circuit pack
All errors on the circuit pack
All errors that are on the circuit pack
but are not associated with a port
All errors for the port
All errors for all external devices
All errors for the external device
specified
Issue 2 April 1996
5-7