The Startup Screen - AT&T OneVision DEFINITY G3 Fault Management User Manual

Starting/Stopping Fault Management
Table 2-1. Starting from HP OpenView and IBM NetView
Use either of the following methods of starting Fault Management:
Method A
1. Highlight a PBX icon.
2. Double click on the DEFINITY icon that represents the PBX for which
you want to run Fault Management.
Method B
1. Highlight a PBX icon.
2. At the menu, select Monitor

The Startup Screen

When you start Fault Management from the NMS, Fault Management displays the
Startup screen.
To view this screen, double click on the following icon:
2-2
Issue 2 April 1996
à à
DEFINITY G3 Fault Management.