AT&T OneVision DEFINITY G3 Fault Management User Manual page 132

Output Options Screen
Table 8-3. Field Entry Area
Field
Output to
Screen
Highlight
Objects
Output to Printer
Print Command
Page Length
Output to File
File Name
Description
Sends the report to the screen. By default, this check box
is turned on.
Highlights the following report objects:
Cabinet
Circuit pack
Sends the report to the printer.
The path and the command name that sends the output to
the printer.
Default = lpr
Maximum = 150 characters.
This field is required if you select Output to Printer.
The number of lines in a printed page.
Default = 66 lines
Minimum = 15 lines
Maximum = 999
Sends the report to a file.
If you select this field, then select one of the following
report formats:
ASCII (default) = Creates an ASCII file that you can
export to another application.
Formatted = Prints the report with the same character
and paragraph formats that you see on the screen.
The name of the report file, up to 150 characters. We
recommend that you enter the absolute path name.
This field is required if you select Output to File.
8-5
Issue 2 April 1996