Start-Up Messages - AT&T OneVision DEFINITY G3 Fault Management User Manual

The Startup Screen
Figure 2-1. The Fault Management Startup Screen

Start-Up Messages

The Startup screen displays one of the following messages to describe the
start-up activity:
Refresh in progress, estimated delay nnn seconds, n
seconds elapsed.
This refresh status message indicates that Fault Management has
requested a full data refresh. The Proxy Agent gets new data from the PBX
and forwards it to Fault Management. The message includes the
— Estimated amount of time necessary to refresh data (nnn)
— Elapsed time (n)
Fault Management requests a full refresh if the value in the Refresh on
Start-up field on the Setup screen is TRUE. This value is the default
setting.
Refer to Chapter 3, Customizing Fault Management, for instructions on
changing the start-up settings.
Refresh on startup failed! Continuing with cache data.
This message displays if the Proxy Agent is unable to connect to the PBX.
Fault Management uses data stored in the Proxy Agent instead of data
refreshed during initialization.
2-3
Issue 2 April 1996