How To Save Reports - AT&T OneVision DEFINITY G3 Fault Management User Manual

Output Options
3. Do you want to change the page length? (The default is 66 lines.)
4. Click on Apply.
5. Did you open the Output Options screen from the Report Builder?
Result: Fault Management uses the command that you specified in the
Print Command field to send the report to the printer.

How to Save Reports

To save the report to a file:
1. Click on Output to File.
2. Click on one of the following file formats:
3. Enter the file's name in the File Name field. You can enter up to 150
characters.
4. Do you want to append the report to the file in the File Name field?
5. Did you click on Formatted in step 2?
6. Did you click on ASCII in step 2?
7. Click on Apply.
8. Did you open the Output Options screen from the Report Builder?
8-8
Issue 2 April 1996
If no, go to step 3.
If yes, enter the desired number of lines in the Page Length field.
If no, go to step 4.
If yes, click on Run Report.
If no, you have completed this procedure.
ASCII (to save the file for export to another application)
Formatted (to use the format that you see when you display the
report)
If yes, click on Append.
If no, go to step 5.
If yes, you can change the Page Length field. (Optional)
If no, go to step 6.
If yes, you can change the field delimiter by selecting an item from
the Delimiter field's pull-down list. (Optional)
If no, go to step 7.
If yes, click on Run Report.
If no, you have completed this procedure.