AT&T OneVision DEFINITY G3 Fault Management User Manual page 28

Introduction
Figure 1-5. Trap Message for Resolved Alarms
Table 1-3. Field Descriptions for Trap Messages for Resolved Alarms
Field
Heading Information
ALL ALARMS
RESOLVED
Alarm and Error Refresh Interval
Fault Management periodically polls the PBX for alarm and error information. The
interval of time specified in the Alarm and Error Refresh Interval field on the Setup
screen determines how often polling occurs. When the amount of time specified
in this field passes, Fault Management starts the data refresh. The cycle begins
again when Fault Management completes the refresh.
Fault Management allows you to:
Set this time interval for anytime from 5 and 1500 minutes
Turn off polling for alarm and error data
For more information about changing the interval for the alarm and error refresh,
see Changing Time Intervals.
1-16
Issue 2 April 1996
Description
The first line of text, including:
The date and time that the Proxy Agent
received the trap
The name of the node on the NMS
Trap message that indicates all alarms have
been cleared.