Changing Time Intervals - AT&T OneVision DEFINITY G3 Fault Management User Manual

Changing Time Intervals

Table 3-4. Procedure for Changing Grey Scale Settings
Use the following steps to change the default settings for grey scale:
1. Select Options
2. Enter the following in each of the color fields that you want to change:
greyxx
xx = the percentage of grey. The higher this percentage, the lighter the
grey.
3. Click Apply to test your changes.
4. Select Options
Changing Time Intervals
The Setup screen allows you to change the time intervals for:
Refreshing alarms and errors
Refreshing circuit pack data
Polling alarms
à
Grey Scale.
à
Save to save your changes for future sessions.
3-5
Issue 2 April 1996