Changing Colors - AT&T OneVision DEFINITY G3 Fault Management User Manual

Customizing Fault Management

Changing Colors

The Setup screen allows you to change the color settings for:
Alarm conditions
Circuit pack information on the configuration map
You can:
Select any color available to your monitor.
Specify a hexadecimal RGB color value.
Select a gray-scale instead of colors. This feature is designed for users
who are color-impaired or who have monochrome monitors.
Double click on a table icon for more information:
Table 3-2. Color Fields on the Setup Screen
Field
Major Alarm Color
Minor Alarm Color
Warning Alarm Color
Circuit Pack Mismatch Color
Highlight Color
Circuit Pack Select Color
Table 3-3. Procedure for Changing Colors
Use the following steps to change the default color settings:
1. Enter either the color name or the hexadecimal RGB color value in the
appropriate color field.
Hint: Enter the RGB color value in the #RRGGBB format.
(RR = red, GG = green, BB = blue)
Example: #FF0000 = red
See Table 3-2 for information about default color settings.
2. Click Apply to test your changes.
3. Select Options
3-4
Issue 2 April 1996
Default Color
Red
Orange
Yellow
Blue
Green
Cyan
à
Save to save your changes for future sessions.
Default Grey Scale
0% Grey
55% Grey
80% Grey
0% Grey
0% Grey
0% Grey