Alarms Reports - AT&T OneVision DEFINITY G3 Fault Management User Manual

How Fault Manager Displays Faults

Alarms Reports

Alarms reports display alarm data about faults on the PBX. They are specific to
the hardware layer currently displayed on your screen and provide the following
information for that layer:
What faults exist
Which hardware is affected
The Fault menu allows you to select a report that displays alarms for:
All the alarms for the hardware layer that is currently displayed
Only the alarms that are not specific to the hardware you are displaying
NOTE:
These reports show alarm data that is current at the time you request the
report. Fault Management does not update the data while the report
window remains open. To ensure that the data is up to date, close and then
re-open any open report window.
Double click on an icon for more information.
Table 5-1. Types of Alarms Reports
Screen
Switch
View
Cabinet
View
Circuit
Pack
Information
Fault Menu Command
All Alarms
Switch Level Alarms
All Alarms for
Cabinet #
Cabinet Level Alarms
for Cabinet #
All Alarms for Circuit
Pack #
Circuit Pack Level
Alarms for
Circuit Pack #
Report Description
All active alarms in the PBX
All active alarms that are in the PBX
but are not associated with any
cabinet
All active alarms in the cabinet
All active alarms that are in the
cabinet but are not associated with
any circuit pack
All active alarms on the circuit pack
All active alarms that are on the
circuit pack but are not associated
with a port
Issue 2 April 1996
5-3