Button Line For Output Options; How To Display Reports; How To Highlight Objects; How To Print Reports - AT&T OneVision DEFINITY G3 Fault Management User Manual

How to Display Reports

Button Line for Output Options

The button line at the bottom of the screen allows you to complete the following
commands.
Button
Apply
Close
You can also select these commands from the Options menu.
How to Display Reports
You can display a standard report in the usual manner, by making a selection
from the menu bar. You do not need to use the Output Options screen.
To use the Output Options screen to display a report that you created on the
Report Builder screen:
1. Click on Apply.
2. Click on Run Report.
Result: the report displays on your screen.

How to Highlight Objects

To highlight Fault Management objects:
1. Click on Highlight Objects.
2. Click on Apply.
3. Did you open the Output Options screen from the Report Builder?

How to Print Reports

To print a report:
1. Click on Output to Printer.
2. Do you want to change the print command? (The default is lpr.)
Description
Generates the report based on the entries you
make in the fields.
Closes the Output Option screen without saving
your entries.
If yes, click on Run Report.
If no, you have completed this procedure.
If yes, enter a new command in the Print Command field.
8-7
Issue 2 April 1996