Startup Screen - AT&T OneVision DEFINITY G3 Fault Management Installation And Integration Manual

Integration for at&t onevision

Hide thumbs Also See for OneVision DEFINITY G3 Fault Management:

Table of Contents

Alarm States

Startup Screen

Verify that the Proxy Agent is connected to the PBX when you start Fault

Management as follows:

1. Follow your normal startup procedure.

2. When the Fault Management Startup screen displays, examine the

startup message.

If the message is . . .

Refresh in progress, estimated

delay nnn seconds, nnn seconds

elapsed.

Refresh on Startup Failed!

Continuing with Cache Data.

n = a number

NOTE:

Neither of these messages display if the Refresh Proxy Agent On

Startup field on the Setup screen is set to FALSE. (You can access

this screen from the Options menu on the Switch View screen.)

The startup screen displays for a brief time. So, if you cannot read these

messages, you can verify connectivity by refreshing data while Fault

Management is running. (This process is described in the next section.)

Do not rely on the following message that displays on the Switch View to

verify connectivity:

SUCCESS all data retrieved from switch!...

5-8

Issue 1 October 1995

Then the

connection is . . .

Down

Table of Contents

Do you have a question about the OneVision DEFINITY G3 Fault Management and is the answer not in the manual?