System Reset - AT&T MERLIN Plus System Manual

PROGRAMMING
HOW TO USE

System Reset

DESCRIPTION
3 Touch the Auto Intercom button(s) or dial the intercom number(s) of the
voice terminal(s) for which you want a report.
The printer prints the report as it receives data from the system.
Touch Administer.
4
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
5
position.
Printout Cancellation. To cancel a printout in progress and to delete all
waiting report requests:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *63.
2
The printer stops printing.
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
4
position.
N o n e
N o n e
This feature is intended for service personnel only.
WARNING:
When the administrator uses System Reset, the entire MERLIN Plus system is
set to the initial feature assignments, and consequently erases any system
administration, such as System Speed Dial number or call restrictions. It is
useful when making radical changes to the system or starting administration
over again.
MERLIN Plus System Features 5-71