AT&T MERLIN Plus System Manual page 128

Speaker
DESCRIPTION
5-64 Section 5: Reference
If the
person's
intercom
number is:
Intercom 10
Intercom 11
Intercom 12
Intercom 13
Intercom 14
Intercom 15
Intercom 16
Intercom 17
Intercom 18
Intercom 19
For example, the attendant may want to turn on the Message light at
Intercom 15, but does not have an Auto Intercom button for that person.
The attendant refers to the chart above and finds that the Send Message
button code is #17. Then the attendant dials #01 plus #17 to light the
Message light.
To turn off someone's Message light from your voice terminal:
1 At the administrator/attendant voice terminal, touch Send Message.
Touch the Auto Intercom button for the person's voice terminal.
2
The red light next to the Auto Intercom button goes off.
If the attendant is using a 10-button voice terminal, dial #01 and a Send
Message button code from the chart that appears above.
You can use your voice terminal speaker when you have dialed a call or been
put on hold to monitor a line without lifting your handset. You can also allow
others in your office to hear a conversation while you have a call in progress.
Dial this
If the
Send
person's
Message intercom
button code:
number is:
# 2 2 Intercom 20
# 2 1
Intercom 21
# 2 0 Intercom 22
# 1 9 Intercom 23
# 1 8
Intercom 24
# 1 7 Intercom 25
# 1 6 Intercom 26
# 1 5 Intercom 27
# 1 4
Intercom 28
# 1 3
Intercom 29
Dial this
Send
Message
button code:
#03
#04
# 0 5
# 0 6
#07
#08
#09
#10
#11
#12