To do this, use the instruc- tions found on the last page of this card. For more information, refer to the MERLIN Plus System Training Manual and Section 5, "Reference," in the MERLIN Plus System Manual.
PLACING CALLS To place an outside call: Lift your handset and dial. To select another line: Touch the line button. Lift your handset and dial. The red light next to a line button means you will get that line when you lift your handset. The green light means the line is busy.
Conference. To add a second outside person: Touch Conference. Touch a line button. Dial an outside number. (There is a limit of two outside people; two coworkers can bridge onto the line.) Drop. To disconnect one line at a time from the conference: Touch Drop.
Page 4
The feature remains active until you: Touch Do Not Disturb again. lNTEROFFICE COMMUNICATION Message. Your MERLIN Plus system attendant lets you know that a message is waiting for you by turning on the light next to Message. Call your system attendant for the message. Then turn off the Message light by touching Message.
When you hear a beep, speak into your handset. Touch a Group Page button for one of the groups. When you hear a beep, lift your handset and make the announcement. Loudspeaker Page. To make an announcement through a loudspeaker paging system: Touch Intercom.
Page 6
PROGRAMMING Follow these steps to program features onto your voice ter- minal. For more information about programmable features, see Section 5, “Reference,” in the System Manual. Label the button you want to program. Slide the T/P (Test/Program) switch to P. The voice terminal rings every 5 seconds.
Need help?
Do you have a question about the Merlin Plus and is the answer not in the manual?
Questions and answers