AT&T MERLIN Plus System Manual page 110

Message
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
5-46 Section 5: Reference
To place an intercom call using a Manual Signaling button:
Touch Intercom.
1
Touch Speaker.
2
Touch the Manual Signaling button for the person you want to call.
3
4 When you haer a beep, lift your handset.
When the light next to the Message button is on, your MERLIN Plus system
attendant has a message for you.
Your Message light can only be turned on from the administrator/attendant
console.
Note that 5-button voice terminals do not have a Message button. Therefore,
the attendant will have to use another method to let these people know that
they have a message waiting.
None
None
The system attendant can turn on the light next to the Messge button at a
person's voice terminal.
At the administrator/attendant console, touch Send Message.
1
Touch the Auto Intercom button for the person's voice terminal.
2
The red light next to the Auto Intercom button goes on, indicating the person's light is lit..
If the attendant is using a 10-button voice terminal as the attendant console,
refer to "Send Message" for directions on sending a message to voice terminals
in the system.
A person can turn off the Message light on his or her voice terminal.
Touch Message.
1