AT&T MERLIN Plus System Manual page 108

PROGRAMMING
HOW TO USE
5-44 Section 5: Reference
Buttons with lights are recommended for the Loudspeaker Page feature.
To program a Loudspeaker Page button for your voice terminal:
Label the button Loudspeaker Page.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that you
cannot place or receive calls.
Touch the button you want to program.
3
Dial *91.
4
Dial 6.
5
Slide the T/P switch to the center position.
6
You can use a programmed button or a dial code to access this feature.
To use a Loudspeaker Page button:
Touch Loudspeaker Page.
1
When you hear a beep, lift your handset and make your announcement.
2
To use this feature by dialing a code:
Touch Intercom.
1
Lift your handset.
2
Dial 6.
3
4 When you hear a beep, make your announcement.
When you hang up, the loudspeaker turns off automatically.