AT&T MERLIN Plus System Manual page 133

Dial two digits for the month (01 through 12).
3
Dial two digits for the day (01 through 31).
4
Dial two digits for the year (00 through 99).
5
For example, if the date is May 16, 1986, dial *80 05 16 86.
Touch Administer.
6
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
7
position.
To set the current time:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *81.
2
Dial two digits for the hour (00 through 23).
3
Dial two digits for the minute (00 through 59).
4
For example, if the time is 3:25 A.M., dial *81 03 25; if the time is 3:25
P.M., dial *81 1525.
Touch Administer.
5
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
6
position.
Control Unit Jack Assignment for the System Feature Report. To assign a
voice terminal jack on the control unit for the System Feature Report: (The
system is factory-set to have the the data collector and printer connected to
voice terminal jack 19 for the Call Report feature; it is best to use the same
jack assignment for the System Feature Report.)
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *85.
2
Touch the Auto Intercom button of the jack to which the data collector
3
and the printer are connected for the Call Report feature.
Touch Administer.
4
The console beeps twice.
MERLIN Plus System Features 5-69