AT&T MERLIN Plus System Manual page 168

Administration Procedure
Make Line A and/or Line E private.
Customize line assignments to a telephone.
Assign Button-Free Line Operation to a
telephone.
Assign call restrictions to a telephone.
6-2 SectIon 6: Quick Reference Guides
1
Enter administration mode.
2
Dial *57. The green lights next to the buttons for Line A and Line E
indicate their status:
Green light on = privacy active
Green light off = privacy inactive
3
Touch the line button until the green light indicates the privacy status you
want.
4 Touch Administer.
The console beeps twice.
5
Leave administration mode.
1
Enter administration mode.
2 Touch the Auto Intercom button or dial the intercom number for the
phone.
3
Touch the line buttons to add or remove lines.
Green light on = line is assigned
Gree light off = line is not assigned
4
Leave administration mode.
1
Enter administration mode.
2 Touch the Auto intercom button or dial the intercom number for the
phone.
3
Remove all lines from the phone by touching each line button that has a
green light on next to it.
The green lights go out when you touch the buttons.
4 Touch the line button for each line you want the phone to have access to.
The green lights go on next to the buttons you watch.
5 Dial either *31 if you want the phone to ring on incoming calls or *32 if
you don't want it to ring.
6
Touch Administer.
The console beeps twice.
7
Leave administration mode.
To make all outside lines reappear on the voice terminal, enter
NOTE:
administration mode, touch the Auto intercom button or dial the intercom
number of the phone, dial *34, touch Administer, and leave administration
m o d e .
1
Enter administration mode.
2
Touch the Auto Intercom button or dial the intercom number for the
p h o n e .
3 Touch Restrict repeatedly until the green light indicates the desired
restriction.
Green light on steady = Unrestricted (all calls)
Green light flashing = Toll restricted (no long distance)
Green light off = Outward restricted (no outside calls)
4 Leave administration mode.
Do This