AT&T MERLIN Plus System Manual page 143

CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
None
If your responsibilities do not include system administration, skip this
information.
To set your system for rotary dialing:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *39.
2
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
4
position.
If you need to reset the system for Touch-Tone dialing:
Enter administration mode by sliding the T/P switch to P and touching
1
Administer.
Dial *38.
2
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
4
position.
None
If you have telephone lines that carry rotary signals, you can switch to Touch-
Tone signals midway through a dialing sequence by using the Touch-Tone
Enable feature. (See "Touch-Tone Enable.")
MERLIN Plus System Features 5-79