AT&T MERLIN Plus System Manual page 144

Touch-Tone Enable
DESCRIPTION
CONSIDERATIONS
ADMINISTRATION
PROGRAMMING
HOW TO USE
5-30 Section 5: Reference
This feature is for rotary lines only.
NOTE:
If you have telephone lines that carry rotary signals, use the Touch-Tone
Enable feature to switch to Touch-Tone signals midway through a dialing
sequence. This lets you take advantage of bank-by-phone, credit card
authorization, computer access, and alternate long distance services.
None
None
To program a Touch-Tone Enable button for your voice terminal:
Label the button Touch-Tone Enable.
1
Slide the T/P switch to P.
2
The voice terminal rings every 5 seconds to remind you that you are programming and that you
cannot place or receive calls.
Touch the button you want to program.
3
Dial *76.
4
Slide the T/P switch to the center position.
5
To switch from rotary pulse to Touch-Tone signals as you dial a number:
1 Lift your handset.
Dial the first part of the number.
2
Touch Touch-Tone Enable.
3
4 Dial the remaining numbers
When you hang up your handset, your system returns to rotary signals.