AT&T MERLIN Plus System Manual page 131

Stop
Switchhook Flash
Touch-Tone Enable
System Feature Report
DESCRIPTION
Program a stop into a dialing sequence to wait for a second dial tone. For
example, you may need to program a stop between a local telephone number
and an alternate long distance authorization code.
Dial the local telephone number (seven digits).
1
Touch Drop (Stop).
2
Dial the authorization code (five or six digits).
3
Program a switchhook flash at-the beginning of a dialing sequence. For
example, you may need to program a button with a PBX, Centrex, or Custom
Calling feature code that calls for a switchhook flash.
Touch Recall.
1
Touch Hold (Pause).
2
Dial the PBX or Centrex dial code sequence that gives you access the
3
feature you want to program.
Program Touch-Tone Enable into a dialing sequence on a line with rotary
signals. For example, you may need to use a credit card authorization service
Touch Transfer.
1
Dial the credit card authorization code.
2
This feature is used with a MERLIN Plus system data collector and
NOTE:
an AT&T 475 printer or its equivalent.
If the system administrator needs to verify the features administered to the
system or needs a written copy of the lines and features on each voice
terminal, he or she can use the data collector and the printer to print a
System Feature Report. This report lists both system-wide features and
programmed features and lines on individual voice terminals.
MERLIN Plus System Features 5-67