AT&T MERLIN LEGEND Release 2.0 Equipment And Operations Manual page 201

Applications
Feature Interactions
Account Code
CAS uses the account codes users enter before or during calls to
associate calls with accounts and individuals; these codes appear on
CAS reports.
Coverage
An internal call on a VMI port that transfers to an internal extension will
not go to coverage, but will continue to ring at the internal extension,
If a sender programs his or her telephone so that only outside calls are
sent to coverage, calls received on ICOM or System Access buttons will
not be sent to voice mail,
For Release 2.0, outside calls that would normally proceed to AUDIX
Voice Power as coverage do not do so if the telephone that sends the
call to group coverage has activated Coverage VMS. No special action
is needed on AUDIX Voice Power administration to activate this feature.
Group Calling
Calls that overflow from one calling group to another calling group with
integrated VMI ports are identified as coverage calls via mode codes.
As a result, the overflow calling group's number appears in the called-
party field of the mode code.
For Release 2.0, when AUDIX Voice Power sends a Leave Word Calling
message to an extension, the system identifies the voice mail system as
the sender of the message. As a result, when the voice mail subscriber
uses the Return Call feature, the call goes to any available voice mail
port, not just to the specific port that generated the message. This
improves access by reducing the chance of getting a busy port.
Labeling
Names entered via the Integrated Administration Extension Directory are
sent to the switch and are available through Switch Labeling screens.
Leave Word
If a Leave Word Calling message is left in a mailbox in a system with
heavy VMI traffic, the subscriber may have to dial out manually to retrieve
the message.
Entry
Calling
Integrated Solution Ill (IS Ill)
4-45