AT&T MERLIN LEGEND Release 2.0 Equipment And Operations Manual page 194

Applications
Specify the number of rings before a call transferred by the AVP is sent
to the backup position (system operator).
When the AVP Automated Attendant is used for Night Service only, do
the following:
—
—
— Specify the VMI ports that provide Automated Attendant to be
— Specify the business schedule for AVP.
Platform Requirements
An 80-Mbyte or 200-Mbyte fixed disk drive is required if IS II includes
either IVP AA or AVP.
IS II uses an AT&T Master Controller based on a 6386/SX WGS
processor with UNIX System V/386 Release 3.2,2, which includes the
following:
—
— Keyboard
—
A 355 AF adapter for connecting the Master Controller to the serial port
on the control unit if they are within 50 feet (15 meters) of each other and
are on the same AC branch circuit
ADUs for connecting the Master Controller to the serial port on the
control unit if they are not within 50 feet (15 meters) of each other and
are not on the same AC branch unit
Any additional hardware required by the individual applications included
in IS II, including the cables and adapters for connecting the
applications to the system. See the instruction booklet that comes with
each application.
4-38 Integrated Solution II (IS II)
If the lines/trunks set for answering the Automated Attendant
appear at other stations, set the No Ring option for the other
telephones.
Assign the phantom station to a Night Service group for each
system operator position.
Assign the phantom station to a coverage group, and assign the
VMI calling group to cover that coverage group.
Automated Attendant ports.
Master Controller II processor (with a 40-Mbyte, 80-Mbyte, or
200-Mbyte fixed disk and a 3.5-inch floppy disk drive)
Video monitor (monochrome or color)
Optional tape drive (required for systems with a 200-Mbyte fixed
disk for saving UNIX files, application program files,
administration files, and voice system files during backup)