Basic Operation Of Voice Terminals - AT&T Merlin II Installation And Maintenance Manual

FIGURE 1-7 A selection of digital voice terminals.
BASIC OPERATION
OF VOICE
TERMINALS
7406D with
Data Stand
Voice terminals perform a variety of functions. With a
voice terminal, a user can make and receive intercom and
outside calls, page someone, and, with the proper voice
terminal (the attendant console), administer the MERLIN
II system. Buttons on voice terminals maybe
programmed for different functions. The following
paragraph describe the basic operations of voice
terminals.
Administration. Two voice terminals, the Display
Console and the BIS-34D, can be used to administer
systems with Feature Module 1 and Feature Module 2.
The Display Console, however, is the only voice
terminal that can administer new MERLIN II Release
3 features. The voice terminal used for administration
must be connected to station jack 01 on the control
unit. During administration, the voice terminal
Test/Program switch must be set to "Program". This
switch is set to the center position during normal
operation
7406D with
display and
Data Stand
System Hardware 1-29