Printing The Inward Dial Plan - AT&T Merlin II Installation And Maintenance Manual

PRINTING THE
INWARD DIAL PLAN
1 Enter Administration mode by sliding the T/P switch to
.
P
2 Press Conference twice.
The administration menu appears.
3 Press
[More], [More], [More], [TieLines], [More], [More].
[More], [InDPin]
The inward dial plan screen appears.
4 Press
[Block] .
5 Press
[Stations] .
6 Dial the first (lowest numbered) new dial code.
7 Press .
[Enter]
The system renumbers all the stations sequentially, then returns
you to the block renumber screen.
8 Press Conference to return to the main administration
menu, or leave administration mode by sliding the T/P
switch to the center.
To get a printout of the inward dial plan, follow these
s t e p s :
1
Enter administration mode by sliding the T/P switch to
P.
2
Press Conference twice.
The administration menu appears.
Press
3
[More], [More], [Print], [More], [More], [More],
[More], [InDPin]
Wait until printing is complete before leaving
administration mode. Don't remove the printout until
after you've left administration mode or printing page
alignments will be affected.
4 Press Conference to return to the main administration
menu, or leave administration mode by sliding the T/P
switch to the center position.
.
.
Administering a New System
3-61