Selecting The Answer Supervision Time - AT&T Merlin II Installation And Maintenance Manual

To select the answer supervision time for tie lines, follow
SELECTING THE
these steps:
ANSWER
SUPERVISION TIME
1
2
3
4
5
6
7
8
9
Enter administration mode by sliding the T/P switch to
P.
Press Conference twice.
The administration menu appears.
Press
[More], [More], [More], [TieLines], [More], [More],
[AnsSupv]
The answer supervision screen appears.
Dial the line number or
line, then press
[Enter]
The current setting is displayed.
Press remove the old setting.
[Drop]
Press
NOTE: [Exit]
setting.
The answer supervison screen appears.
Dial the new setting.
> time= 20 to 4800 ms (increments of 20)
> time= 300 ms (default)
Use the backspace button to erase numbers
NOTE:
incorrectly dialed.
Press . The system will round
[Enter]
nearest increment.
The answer supervion screen appears.
Repeat steps 4 through 7 for each tie
Press Conference to return to the main administration
menu, or leave administration mode by sliding the T/P
switch to the center position.
the line button of a tie
press
.
if you do not want to change the
down to the
line port.
Administering a New System 3-57