Flexible Renumbering Of The Dial Plan - AT&T Merlin II Installation And Maintenance Manual

SELECTING THE
INWARD DIAL PLAN
FLEXIBLE
RENUMBERING OF
THE DIAL PLAN
The Inward Dial Plan, that is, the numbers that other
people use to call in to the business on tie lines, can have
either three or four digits. This option is set for all the tie
lines installed and does not need to be administered to
individual lines. To change the number of digits people
use to dial into the MERLIN II system on tie lines, follow
these steps:
1 Enter administration mode by sliding the T/P switch to
P.
2 Press Conference twice.
The administration menu appears.
Press
[More], [More], [More], [TieLines], [More], [More].
3
[More], [InDigt]
The inward digit screen appears showing current setting.
4
Press if you do not want to change the setting.
[Exit]
o r
Press
or
[Drop]
5
Use the dial pad to dial the number of digits, either 3 or
4 (default is 4), for the inward dial plan.
Press .
[Enter]
6
Press Conference to return to the main administration
7
menu, or leave administration mode by sliding the T/P
switch to the center position.
The default tie line inward dial plan provides 4-digit
numbers, 4010 through 4097. These numbers parallel the
default intercom numbers between intercom numbers
and 69. The tie line dial plan number continue
consecutively while the intercom numbers leap from 69 to
700 before continuing consecutively. Form 2c, Flexible
Numbering Form-Tie Line Inward Dial Plan shows the
relationship between the default dial plan numbers and
default intercom numbers and station jack numbers.
.
to remove the old setting.
[Bksp]
Administering a New System 3-59
10