Selecting The Direction - AT&T Merlin II Installation And Maintenance Manual

DEFAULT TIE LINE
SETTINGS
SELECTING THE
DIRECTION
The default settings for tie line options are summarized
below in Table 3-3.
TABLE 3-3 Default Tie Line Settings
Tie Line Option
Answer supervision time
Dial mode (incoming line)
Dial mode (outgoing line)
Dial Tone
Direction
Disconect Time (incoming)
Disconect Time (outgoing)
Inward Dial Plan
Line type (incoming)
Line type (outgoing)
Signal type
To select the direction on which tie line calls can be
initiated, follow these steps:
1 Enter administration mode by sliding the T/P switch to
P.
Press Conference
2
The administration menu appears.
3 Press
[More], [More], [More], [TieLines], [Dirctn].
The direction screen appears.
4 Dial the line number or press the line button of a tie
line, then press
[Enter].
Default Setting
300 ms
Rotary
Rotary
Remote
Two way
300 ms
300 ms
Four digits, 4010 through 4097
Wink start
Wink start
Type 1 Standard
twice.
Administering a New System
3-53