Selecting The Line Type - AT&T Merlin II Installation And Maintenance Manual

SELECTING THE LINE
TYPE
3-54 Administering a New System
5 Press the button beneath the display to select the
direction of the tie line:
> Two way (default)
> Outgoing
> Incoming
The direction screen appears.
6 Repeat step 4 for each line port.
7 Press Conference to return to the main administration
menu or leave administration mode by sliding the T/P
switch to the center position.
To select the tie line type, follow these steps:
1
Enter administration mode by sliding the T/P switch to
P.
2
Press Conference twice.
The administration menu appears.
3 Press
[More], [More], [More], [TieLines], [InType].
The in type screen appears.
4
Dial the line number or press the line button of a tie
line, then press
5
Press the button beneath the display to select the type
of tie line wanted:
> Wink= wink start (default for outgoing)
> Delay= delay dial
> Imm = immediate start
> Auto= automatic ringdown (default for incoming)
The
in type screen appears.
[Enter].