Optional Features - AT&T Merlin II Installation And Maintenance Manual

Optional Features

FEATURES
COMPATIBILITY
TABLE
After you have completed system administration, you can
assign the optimal features listed on the following table to
the system. If the system has a printer, you
printout showing the current status of these
"Printouts" in Table 3-5 on page 3-89.
Table 3-4 identifies all the optional features available for
each MERLIN system. A check mark in the FM 1
II
column indicates the feature is available with Feature
Module 1. A check mark in the FM2 column indicates the
feature is available with Feature Module 2. A check mark
in the R3 column indicates the feature is available with
Release 3.
can get a
features. See
Optional Features
3-71