Feature Programming Chart - AT&T MERLIN 3070 Administration Manual

Feature Programming Chart

Feature Name
(Suggested Button Label)
Outside Auto Dial
Auto Intercom
Speed Dial Access
Personal Speed Dial
(does not use a button)
Last Number Redial
Saved Number Redial
Intercom Conference
Intercom Drop
Auto Answer-Outside
Auto Answer-Intercom
36
Description
Dial outside telephone
numbers, PBX/Centrex ex-
tensions, PBX/Centre
feature codes with one
touch.
Simplify dialing MERLIN
system intercom numbers.
Use with Personal Speed
Dial, Saved Number
Redial, and Last Number
Redial.
Assign a 2-character code
(01 through 22) to each
telephone number you call
frequently.
Redial the number you
dialed most recently.
Save a number for later
redialing.
Use conference par-
ticipants' intercom num-
ber thus not tying up your
PBX./Centrex lines during
conference calls.
Disconnect participants
from the Intercom Con-
ference call.
Have a modem or answer-
ing machine go on
automatically whenever an
outside or PBX/Centrex
call rings at your voice
terminal.
Have an optional Hands-
Free Unit go on auto-
matically when you receive
intercom calls.
Programming Code
Dial *90.
Dial an outside access
code and pause,
followed by an outside
number, or dial a
PBX/Centrex extension
number or a PBX/Cen-
trex feature code.
Dial *91.
Dial a 2-digit MERLIN
system intercom
number.
Dial *94.
Touch Speed Dial
Access.
Dial a Personal Speed
Dial code (01 through
22).
Dial *90.
Dial an outside tele-
phone number, a
PBX/Centrex extension
number or a PBX/Cen-
trex feature code.
Dial *73. (Yo do not
U
need to dial an outside
number.)
Dial *74. (Y do not
OU
need to dial an outside
number.)
Dial *96.
Dial *97.
Dial *75.
Dial *70.
Notes
A button with lights is recom-
mended but not required.
For 5- or l0-button voice ter-
minals only.
For 5- or 10-button voice ter-
minals only.
If you have a 5- or 10-button
voice terminal, you can dial a
code to use this feature if you
prefer not to use a button.
If you have a 5- or 10-button
voice terminal, you can dial a
code to use this feature if you
prefer not to use a button.
Used only with a modem or
answering machine. Requires a
button with lights and a Multipur-
pose Adapter.
Used only with a Hands-Free
Unit. Requires a button with
lights.