Input Configuration - Barco CLM R10+ R90501001 User Manual

8. Input menu
C
AUTION
jector.
8.2.2 Input configuration
How to change?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Input and press ENTER.
The Input menu is displayed.
3. Use the ▲ or ▼ key to select Slot module type and press ENTER.
The slot overview window is displayed with the actual situation filled out.
4. Use the ▲ or ▼ key to select a slot.
Press ENTER to open the Slot module type configuration window. This window is different for each module type.
5. Use the ▲ or ▼ key to select desired mode for the selected slot. (image 8-1, image 8-2, image 8-3, image 8-4)
Image 8-1
Image 8-4
Possible results.
Input Indication
module
5 cable RGB AUTO
YUV AUTO
CVS/S-VIDEO AUTO
RGB HS/VS - CS
RGB CV
64
:
Always install a cover plate on an unused input slot. This to prevent dust intrusion into the pro-
Image 8-2
Description
RGB input. Projector searches for the sync signal and projects the correct image.
YUV input. Projector searches for the sync signal and projects the correct image.
Video or S-Video input. Projector detects automatically which type of video is
connected to the inputs.
RGB input with separate horizontal and vertical sync or separate composite sync.
RGB input with composite video as sync signal
Image 8-3
R59770021 CLM R10+ 11/10/2010