Removal Of The Lamp Door - Barco CLM R10+ R90501001 User Manual

17. Projector covers, removal and installation
Image 17-2
Remove the front cover

17.2 Removal of the lamp door

W
ARNING
Necessary tools
Flat screwdriver
How to remove the lamp door
1. Release the captive screw at the middle upper side of the side cover on the input side. (image 17-3)
2. Take the lamp door with both hands, one on each side, and pull it upward until the cover comes free from its 4 locks. (image 17-4)
Image 17-3
Release captive screw
182
b
c
:
This procedure may only be performed by qualified technical service personnel.
R59770021 CLM R10+ 11/10/2010