Table of Contents
Advertisement
D. SPECIFICATIONS
Overview
•
Specifications CLM R10+
•
Specifications CLM 5 cable input (multi purpose)
•
Specifications CLM HDSDI – SDI input
•
Specifications CLM DVI input
•
Specifications CLM DVI HDCP input
D.1 Specifications CLM R10+
Overview
AC power
Aspect Ratio
Brightness uniformity
Communication Port
Contrast ratio
Dimensions
Display
Electromagnetic Interference
Features
Input
Lamp lifetime (typical)
Lamp type & power
Lens Shift
Light Output
Network connection
Noise Level
R59770021 CLM R10+ 11/10/2010
100 - 240 VAC (±10%)/50-60 Hz
4:3
95%
10/100 Mb/s Ethernet (on RJ45)
RS-232/422 (on D9)
IR external
XLR wired
1,200:1 (full field)
293 x 442 x 692 mm
Single-chip DLP (0.95' DMD™ x1)
Complies with FCC rules & regulations, part 15 Class A and CE EN55022 Class A
Picture in picture (up to two sources on-screen simultaneously)
Optional 3D
Input
DVI
1x YUV1 (on RCA/cinch)
1x Composite video (on RCA/cinch)
1x S-Video (on 4-pin mini-DIN)
Compatibility
All current video sources (PAL, SECAM, NTSC) in Composite, S-VHS, Component or
RGB formats
All current HDTV sources
All computer graphics formats from VGA, SVGA, XGA, SXGA, full HD to UXGA
750/1,250hrs
4x300W UHP
Vertical: x> -20% to +110%
Horizontal: x> -15% to +100%
(small differences occur per lens type)
(short throw lenses have less shift)
Typically 9,500 ANSI lumens (±10%)
Typically 10,000 center lumens (±10%)
10/100 base - T
Projector Toolset control
3rd party device control
49 dB
D. Specifications
199
Advertisement
Table of Contents
