Table of Contents
Advertisement
D. Specifications
D.4 Specifications CLM DVI input
Input front view
Image D-3
Specifications
•
DVI type: DVI-I (DVI-Integrated), but the analog signals are not supported. Single-link configuration.
•
Single link dvi for pixelclocks up to 165MHz
•
Vertical frequencies: 24 - 75 Hz
•
Horizontal frequencies: 20 - 90 kHz
•
Supported resolutions: up to UXGA (1600 x 1200) at 60 Hz.
•
Cable lengths: up to 3 meter at UXGA speed.
•
Compliance: DDC2B support according to VESA EDID Version 1.2
•
Diagnostic LED's on front panel:
-
Green LED: Lights up in case input module is selected
-
Yellow LED: Lights up in case sync detected
D.5 Specifications CLM DVI HDCP input
Input front view
Image D-4
Specifications
•
DVI type: DVI-I (DVI-Integrated), but the analog signals are not supported. Single-link configuration.
•
Supports UXGA Resolution (1600 x 1200) (Output Pixel Rates up to 165 MHz)
•
True-Color, 24 Bits/Pixel, 48-Bit Dual Pixel Output Mode, 16.7M Colors at 1 or 2 Pixels Per Clock
•
Digital Visual Interface (DVI) and High-Bandwidth Digital Content Protection (HDCP) Specification Compliant
•
Vertical frequencies: 24 - 75 Hz
•
Horizontal frequencies: 20 - 90 kHz
•
Cable lengths: up to 3 meter at UXGA speed.
•
Compliance: DDC2B support according to VESA EDID Version 1.2
•
Diagnostic LED's on front panel:
-
Green LED: Lights up in case input module is selected
-
Yellow LED: Lights up in case sync detected
202
DVI input
HDCP DVI input
Sel
Sync OK
Sel
Sync OK
R59770021 CLM R10+ 11/10/2010
Advertisement
Table of Contents
