Interface Standard - Barco CLM R10+ R90501001 User Manual

13. Projector control
How to set up?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Serial communication and press ENTER.
The serial communication menu opens.
4. Use the ▲ or ▼ key to select Baudrate and press ENTER to toggle between the available baud rates.
The following baud rates can be selected:
- 9600
- 19200
- 38400
- 57600
- 115200
5. Press EXIT to return. (image 13-9, image 13-10, image 13-11)
Image 13-9

13.3.2 Interface standard

What can be done?
The communication protocol for the communication between the projector and a computer can be set to RS232 or RS422.
How to set up
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Projector control and press ENTER.
3. Use the ▲ or ▼ key to select Serial communication and press ENTER.
The serial communication menu opens.
4. Use the ▲ or ▼ key to select Interface standard and press ENTER to toggle between [RS232] or [RS422].
Default: [RS232] (image 13-12, image 13-13, image 13-14)
Image 13-12
140
Image 13-10
Image 13-13
Image 13-11
Image 13-14
R59770021 CLM R10+ 11/10/2010