Table of Contents
Advertisement
12.5 Blanking
What can be done ?
Blanking adjustments affect only the edges of the projected image and are used to frame the projected image on to the screen and
to hide or black out unwanted information (or noise). A '0' on the bar scale indicates no blanking.
Which blanking adjustments are available ?
•
top blanking
•
bottom blanking
•
left blanking
•
right blanking
Image 12-15
Blanking
A
Top blanking
B
Bottom blanking
C
Left blanking
D
Right blanking
The reset function brings all blanking settings back to zero.
How to adjust the blanking?
1. Press MENU to activate the menus.
2. Use the ▲ or ▼ key to select Alignment and press ENTER.
3. Use the ▲ or ▼ key to select Blanking and press ENTER.
4. Use the ▲ or ▼ key to select the desired blanking adjustment and press ENTER.
5. Use the ▲ or ▼ key to adjust until the desired blanking is reached.
6. Press EXIT to return. (image 12-16, image 12-17, image 12-18)
R59770021 CLM R10+ 11/10/2010
12. Alignment menu
121
Advertisement
Table of Contents
