Epson R260 - Stylus Photo Color Inkjet Printer Service Manual page 78

EPSON Stylus Photo R260/R265/R270, R360/R380/R390
3. Remove the four screws. (For R260/R265/R270, three screws
Screw (3 pcs.): C.B.P. M3x10 (tightening torque: 5-7 kgf.cm)
•
• Screw (1 pc.): C.P. M3x6 (tightening torque: 7-9 kgf.cm)
(The numbers shown in the figure indicate the order of tightening the screws.)
4. Remove the Main Board. (R260/R265/R270 only)
1
Figure 4-54. Removing the Main Board (1)
The MB Frame deforms easily. Exercise care not to deform it while
removing the Main Board.
Main Board
Figure 4-55. Cautions on Removing the Main Board Unit
Disassembly/Assembly
only)
R360/R380/R390
3
2
4
R260/R265/R270
2
3
MB Frame
Removing Control Boards
5. Remove the Main Board, taking extra care not to get the FFC caught on the
opening of the CB Support Shield Plate. (R360/R380/R390 only)
Removal Direction
Figure 4-56. Removing the Main Board Unit (2)
Revision B
Main Board
Opening
CB Support
Shield Plate
79