Epson R260 - Stylus Photo Color Inkjet Printer Service Manual page 34

EPSON Stylus Photo R260/R265/R270, R360/R380/R390
R360/R380/R390
Error Name
Messages on the LCD
Paper out.
Load paper and press the Start button.
No paper error
The CD/DVD tray is set incorrectly.
CDR Tray error
Please correct, then press the Start
button.
The front tray is in the CD/DVD
position.
Pull up the tray lever to lower the front
tray to the paper position.
The front tray is not in the CD/DVD
position.
CDR Guide error
Push down the tray lever to raise the
front tray to the CD/DVD position.
The CD/DVD guide is in the CD/DVD
position.
Close the CD/DVD guide.
Troubleshooting
Table 3-4. List of Error Messages
R260/R265/R270
LED Indications
Power Paper Ink
Reload the paper and set the front tray to the
paper position by pulling up the tray lever. Then
- Light - press the Paper button on the printer or click the
Continue button if it appears on the screen. To
cancel all print jobs, click the Cancel button.
Reload the tray, then press the Paper button on
the printer.
- Light -
For sheets of paper, set the front tray to the
paper position by pulling up the tray lever. For a
CD or DVD, set the front tray to the CD/DVD
position by pushing down the tray lever.
For sheets of paper, turn off the printer and then
High-
remove any jammed paper by hand. For a CD or
- Flash 2 speed
DVD, remove the CD/DVD tray. Next, press
flash
the Paper button on the printer or click the Eject
button if it appears on this screen.
For sheets of paper, set the front tray to the
paper position by pulling up the tray lever. For a
CD or DVD, set the front tray to the CD/DVD
position by pushing down the tray lever.
Error/Warning Indications
STM3 Message
Paper cannot be fed into the printer.
The printer cannot detect the CD/DVD
tray properly.
The CDR guide status does not match
with the print setting.
Revision B
See the table for
Error Cause
Troubleshooting
Table 3-9 (p.43)
Table 3-10 (p.45)
Table 3-11 (p.47)
35