Epson R260 - Stylus Photo Color Inkjet Printer Service Manual page 73

EPSON Stylus Photo R260/R265/R270, R360/R380/R390
3. With a flathead screwdriver or similar tool, disengage the two tabs on the
inner left and right sides.
4. From the bottom side of the Printer, insert a flathead screw driver into the hole
of the Lower Housing to disengage the two tabs. (With R260/R265/R270, the
tabs can be disengaged from the upper side of the Middle Housing.)
Tab (left)
Removal Direction
[Bottom Side]
Figure 4-37. Removing the Front Housing (2)
Disassembly/Assembly
Tab (right)
[Bottom Side]
Removing Exterior Parts/Components
When removing the Front Housing, make sure to remove it in the
specified direction without tilting it, otherwise the tip of the bottom
ribs on both left and right sides may be scratched heavily or
broken.
[Left inner side]
Removal Direction
Figure 4-38. Caution as to Removing the Front Housing
5. Slide the Lower Housing toward you carefully avoiding the two bottom ribs,
and remove the Lower Housing.
Removing the Slot Cover (R360/R380/R390 only)
1. Disengage the two tabs , and remove the Slot Cover.
[Rear side]
Slot Cover
Figure 4-39. Removing the Slot Cover
Revision B
Front Housing
Bottom Rib
Front Housing
74