Epson R260 - Stylus Photo Color Inkjet Printer Service Manual page 42

EPSON Stylus Photo R260/R265/R270, R360/R380/R390
Occurrence
Symptom
Timing
The LD Roller rotates normally to
feed paper, but the Hopper does not
move.
The LD Roller rotates normally, but
paper is not fed into the printer.
Any time
The PF Motor drive force is not
transmitted to the LD Roller shaft.
Troubleshooting
Table 3-9. Troubleshooting for No Paper Error
Failed Part Check Point
1. Is the Hopper not moving properly during the
feeding operation?
ASF Assy
1. Is there any paper dust on the LD Roller?
ASF Assy
1. Is the Extension Spring 0.143 of the clutch
mechanism detached?
LD Roller
Extension Spring
ASF Assy
2. Is the protrusion of the clutch chipped or broken? 2. Replace the ASF Unit.
Protrusion
Troubleshooting by Error Message
Remedy
1. Attach the Compression Spring 2.51
correctly to the ASF Frame and the
Hopper.
1. Remove the paper dust on the LD Roller
with a cloth moistened with alcohol.
* If this does not solve the problem,
replace the ASF Unit.
1. Attach the Extension Spring 0.143
correctly.
ASF
LD Roller
Revision B
Reference
4.5.11 "ASF
Unit"(p.104)
43