Epson R260 - Stylus Photo Color Inkjet Printer Service Manual page 44

EPSON Stylus Photo R260/R265/R270, R360/R380/R390
Occurrence
Symptom
Timing
The CDR Tray is set to the printer,
but the error occurs.
When printing on
CDs/DVDs
The CDR Tray center detection
sequence is interrupted, and the tray
is ejected.
Troubleshooting
Table 3-10. Troubleshooting for CDR Tray Error
Failed Part Check Point
1. Has the part of the CDR Tray that contacts with
the CDR Tray Sensor become cracked?
Contact point
CDR Tray
1. Is the CDR Guide Detection Assy cable not
connected to the Main Board?
CDR Guide
Detection ASSY
2. Is the CDR Tray Sensor damaged?
1. Is there any paper dust or foreign matter on the
white mark on the CDR Tray?
White Mark
CDR Tray
Troubleshooting by Error Message
Remedy
1. Replace the CDR Tray.
CDR Tray
1. Connect the cable to the Main Board.
R360/R380/R390
Main Board: CN9
R260/R265/R270
Main Board: CN4
2. Replace the CDR Guide Detection
Assy.
1. Remove any dust or foreign matter from
the tray.
Revision B
Reference
-
4.5.15 "CDR
Guide Detection
Assy"(p.111)
-
45