Note : Only one medium is accessible at a time either from the printer or a PC. When multiple media are detected at power-on, the printer accesses one by one in the predetermined order given in the

priority column. When a medium in an enabled slot is removed, the next priority slot becomes enabled if a medium is in the slot. Reinserting the medium in the next priority slot is not required.

If no media is detected, the CF slot becomes enabled. Removing/reinserting media in disabled slots does not affect the access priority.

When a target medium does not become accessible because of another medium inserted in a slot that has higher priority than the target one, remove the another medium in order to enable the

target slot.

Notes on handling memory card by access method

When accessing media from the printer:

Frame numbers are automatically assigned to image files in an accessible medium. The total number of image files does not change if another medium is inserted into a disabled slot.

When accessing media from a Windows PC:

One removal disk drive is displayed even when multiple media are inserted into the printer slots. A medium in an enabled slot is accessed from the "removal disk drive".

When accessing media from a Macintosh PC:

A medium in an enabled slot is mounted on the desktop. Another medium inserted in a disabled slot is not mounted.

Product description

Table 1-8. Compatible Card Types by the Card Slot

Standard

CF+ and CompactFlash Specification Revision 2.0 compliant

xD-Picture Card Specification Version 1.20 compliant

MemoryStick Standard version 1.40-00 compliant

MemoryStick Standard Memory Stick PRO Format Specifications version 1.01-00 compliant Copyright protection function is not supported.

SD Memory Card Specifications / PART1. Physical Layer Specification Version 2.0

compliant

MultiMediaCard System Specification Version 3.31 compliant