Xerox 7300B - Phaser Color Laser Printer Service Manual page 45

Service Diagnostics Tests and Functions Table (cont'd.)
Menu Item
Select Duplex
/Simplex
Select Job
Offset
Select Output
Path
Motors/Fans Tests
personnel the ability to energize/de-energize the motors and fans one at a time.
Tray Feed
Motors
Registration
Motor A
Registration
Motor B
Imaging Unit
Motors
(CMYK)
Imaging Unit
Up/Down
Error Messages and Codes
Front Panel Display Results
Select Duplexing: On/Off
Please wait...
Duplex is set to On/Off
Select Offset: On/Off
Please wait...
Offset set to On/Off
Select: Face Down/Face Up
Please wait...
Output set to Face Down/Face Up
- Tests the functionality of motors and fans by giving service
Tray 1 Feed Motor
<if installed>
Tray 2 Feed Motor
Tray 3 Feed Motor
Tray 4 Feed Motor
Tray 5 Feed Motor
Tray Feed Motor On/Off
Motor is On/Off
Remove MPT Media!
Motor is On/Off
If MPT media present, will jam
[Black] [Yellow] [Magenta] [Cyan]
IU Motor is On/Off
Motor is On/Off
Functional Definition
<Press Info to change>
<Press OK to accept value>
<Press Back or Cancel to abort>
Controls how print jobs are
staggered in the top tray.
<Press Info to change>
<Press OK to accept value>
<Press Back or Cancel to abort>
Controls how print jobs are
delivered, face-up or face-down
<Press Info to change>
<Press OK to accept value>
<Press Back or Cancel to abort>
The tray must be removed to run
this test.
<Press OK to continue>
<Press Back or Cancel to abort>
<Auto abort in 10 seconds>
<Press OK to start motor>
<Press Back or Cancel to abort>
<Auto abort in 10 seconds>
<Press OK to continue>
<Press OK to start motor>
<Press Back or Cancel to abort>
<Auto abort in 10 seconds>
Remove the appropriate Imaging
Unit before proceeding with the
test.
After removing the IU, defeat the
interlock switch, then resume the
test.
<Press OK to start motor>
<Press Back or Cancel to abort>
<Auto abort in 10 seconds>
<Press OK to start motor>
<Press Back or Cancel to abort>
<Auto abort in 10 seconds>
2-29