Service Diagnostics Tests And Functions Table - Xerox 7300B - Phaser Color Laser Printer Service Manual

Service Diagnostics Tests and Functions Table

Menu Item
Print Service Menu Map
diagnostics, runs POST and returns printer to Ready.
General Status
Engine Status
Jam Status
Engine Board
ROM Version
Printer
Configuration
Ambient
Temperature/
Humidity
Fuser
Temperature
Consumable
Status
Front Panel
Control
Error Messages and Codes
Front Panel Display Results
- Prints the service diagnostics menu map, exits
- Displays user-selected engine information.
<No Status to Report>
<Error Message>
<Jam @>
<Jam2 @>
Engine Version is n.n.n
Duplex Version is n.n.n
Tray 2 Version is n.n.n
Tray 3 Version is n.n.n
Tray 4 Version is n.n.n
Tray 5 Version is n.n.n
Memory: nnnMB
Hard Drive is Present/Absent
Duplex is Present/Absent
Tray 1-n Installed
Amb. Temp. is nnn deg.C (Celsius)
Amb. Hum. is nnn % (relative percent)
Fuser Temp Upper is nnn deg.C
Fuser Temp Lower is nnn deg.C
Fuser (UpperSide) is nnn deg.C
■
Total Pages
■
Fuser Unit Life (total sheets)
■
transfer unit Life (total images)
■
Black IU Life (total images)
■ Yellow IU Life (total images)
■
Cyan IU Life (total images)
■
Magenta IU Life (total images)
■
Black Toner Life (% used)
■
Yellow Toner Life (% used)
■
Magenta Toner Life (% used)
■
Cyan Toner Life (% used)
Contras:t
Current Contrast: n
Intensity:
Current Intensity: n
Functional Definition
No Status to Report = the printer
is online and ready to print.
Error Message = Displays an error
message that will prevent printing.
Status is displayed sequentially,
one line at a time.
Jam @ indicates the original
reason for the jam, only 1 should
be listed.
Jam2 @ Engineering use only.
Displays the engine firmware
version, duplex version and trays 2,
3, 4, and 5 versions, if installed.
<press Back or Cancel to abort>
Displays current memory installed.
Detects presence of Hard Drive
option.
Detects presence of Duplex option.
Detects presence of Tray 1,2,3,4,5.
<press Back or Cancel to abort>
Displays the current Temperature
and Humidity for the printer.
<press Back or Cancel to abort>
Displays engine reported upper,
lower and upper-side fuser
temperature in degrees Celsius
<press Back or Cancel to abort>
Displays current consumable life
counts.
<press Arrow Down for more
data>
Contrast range n is 1 - 10
Intensity range n is 0 - 10
<press Up/Down to
increase/decrease value>
2-27