Color Registration Sensor Assembly (Pl 5.1.10) - Xerox 7300B - Phaser Color Laser Printer Service Manual

Color Registration Sensor Assembly (PL 5.1.10)

Note: The Color Registration Sensor Assembly contains the ADC
Sensor. If replacing with a new assembly, write down the
tag number located on the Color Registration Shutter Plate
and perform the ADC Calibration Procedure (see pg.
4-116).
1.
Remove the Color Registration Plate Shutter (see pg. 6-188).
2. Remove 2 B screws securing the Color Registration Sensor Assembly.
3. As you lift the assembly, carefully disconnect the 3 harnesses connected to the
assembly.
Reassembly
Caution: Ensure the grounding wire is in place when reinstalling the
shutter.
FRU Disassembly
S7300-168
6-189