Xerox 7300B - Phaser Color Laser Printer Service Manual page 48

Service Diagnostics Tests and Functions Table (cont'd.)
Menu Item
CMYK Toner
Cart Sensor
Read Fuses
Clutch Tests
- Tests the functionality of the clutches by activating one component at a time.
Test runs for 10 seconds or until the test is aborted.
Tray 1 Feed
Clutch
(Optional)
Tray 2, 3, 4
Feed Clutch
Feed Roller 1
Clutch
Feed Roller
2, 3, 4, 5
Clutch
Reg Roller A
Clutch
Right Duplex
Clutch
Left Duplex
Clutch
Solenoid Tests
time. Test runs for 10 seconds or until the test is aborted.
Registration
Shutter
Solenoid
Exit Gate
Solenoid
(Duplex)
Face-Up Gate
Solenoid
(Top/Side
Output Tray)
2-32
Front Panel Display Results
Black Missing / Installed
Yellow Missing / Installed
Magenta Missing / Installed
Cyan Missing / Installed
Fuser is Cut / Not Cut
TBelt is Cut / Not Cut
CIU is Cut / Not Cut
MIU is Cut / Not Cut
YIU is Cut / Not Cut
KIU is Cut / Not Cut
Clutch is On/Off
Clutch is On/Off
Clutch is On/Off
Clutch is On/Off
Clutch is On/Off
Clutch is On/Off
Clutch is On/Off
- Tests the functionality of the solenoids by activating one component at a
Shutter is Open/Closed
Solenoid is On/Off
Solenoid is On/Off
Functional Definition
Toggle the actuator to change
sensor state.
Listen carefully to hear the clutch
engage.
<Press Back or Cancel to abort>
<Auto abort in 10 seconds>
<Press Back or Cancel to abort>
<Auto abort in 10 seconds>
Phaser 7300 Color Printer Service Manual